Non Structural Adhesives


Non-Structural Adhesives bond a range of similar and dissimilar substrates wherever load-bearing strength is not required.  They are offered in a variety of formats and technologies to meet specific application requirements.

Bond rubber, glass, fabric, leather, wood, metals, and plastics including Polyethylene, Polypropylene and oily metals.


Easy to use Polyurethane Adhesives and Sealants are one-component products that out-perform low-tech adhesives that are not designed for tough industrial applications. With excellent adhesion, these adhesives provide a permanent elastic bond used in surface sealing applications and bonds to a variety of materials including fiberglass, metals, plastic and wood.

Industrial and Contact Adhesives

Available in environmentally friendly water-based formulas and traditional solvent based formulas, these high strength adhesives are industrial tools designed to provide innovative answers to a wide variety of bonding opportunities like foam, laminate and gaskets.

Industrial Adhesives

In bonding plastic feathers and nocks onto arrow shafts, fast-tacking 3M™ Scotch-Grip™ Plastic Adhesive 4475 dries quickly to a firm bond. Resists plasticizers, water, and heat up to 200°F (93°C).

With excellent resistance to fuel and oil, 3M™ Scotch-Grip™ Rubber and Gasket Adhesive 847 bonds and seals chemical drum gaskets in place.

Contact Adhesives

For tabletop lamination, 3M™ Fastbond™ Contact Adhesive 2000NF gives you three times the coverage of a typical solvent-based system. For production speed, you go from spray to trim in seconds.

In cabinet assembly, 3M™ Fastbond™ Contact Adhesive 30NF is a formulation proven in shops for four decades. Combines open time of up to 4 hours with high immediate bond strength. Apply with roller, brush, or spray gun.

Hot Melt Adhesives

Hot Melt Adhesives are easy to use systems designed to improve productivity, lower costs and reduce waste. Bonding strength in seconds helps eliminate clamps, while saving time, energy, and space. For heat sensitive materials, low temperature glues are available.  Adhesives are efficiently dispensed through durable hand held guns or bulk systems.

Spray Adhesives

Job-matched formulations that work on paper, plastic, foam, metal and more.  Aerosol Adhesives allow you to apply a controlled pattern to a large area with a wide range of performance and application characteristics for production and maintenance jobs.

Application Equipment

For high speed performance and “take it to the job convenience”, we offer a large variety of 3M applicators and nozzles to fit your application and improve productivity.






Bonding/Fastening | Protecting | Masking | Specialty Products | Dispensers | Packaging

Muir Tapes & Adhesives | Terms and Conditions | Privacy Policy